Your network consists of four servers. Each server has three NICs. Server A is

Discussion in 'Linux Discussion' started by hwyhoney1, May 26, 2008.

  1. hwyhoney1 Not Active

    hwyhoney1
    Joined:
    May 26, 2008
    Messages:
    2
    Likes Received:
    0
    connected to servers B, C, and? I thought 11. was mesh, 12 star and 13 ring, but I am just not sure.
    Your network consists of four servers. Each server has three NICs. Server A is connected to servers B, C, and D. Server B is attached to C and D. Server C is attached to server D. No hub is used. All cabling is CAT 3 UTP crossover cables. What is your physical topology?
    a. Star b. Bus
    c. Ring d. Mesh
    12. Your network consists of a 24-port bridge, two servers, and 15 workstations. Each computer interfaces with the bridge using its own segment of CAT 5 twisted-pair cable, which is terminated at both ends with RJ-45 connectors. What type of physical topology do you have?
    a. Mesh b. Bus
    c. Ring d. Star
    13. Your network?s physical topology is that of a star configuration. From time to time, each workstation will hold a packet called a token, during which time it will transmit data and then pass the token along to the next workstation. What is the logical topology of your network?
    a. Bus b. Star
    c. Mesh d. Ring
  2. rainofkayos Not Active

    rainofkayos
    Joined:
    May 26, 2008
    Messages:
    2
    Likes Received:
    0
    11. is a mesh its actually a partial mesh if im not mistaken
    12. hmmm im thinking its a star
    13. is a logical ring as the token ring network uses
Loading...

Share This Page